Have a bubble party with Minnie Mouse! She has a surprise in the
basket of flowers she carries—just press her XXX or activate with your
capability switch (not included) and tons of bubbles fly out! Minnie
comes with 4 oz. of non-toxic, dye-free bubble juice to get the party
started. Size: 4½"L x 4"W x 9½"H. Requires 3 AAA batteries. Weight:
½ lb.
Operation:
1. Minnie Bubble Blower requires 3 AAA batteries (Not included)
to operate. Use alkaline batteries only (e.g. Duracell or
Energizer brand). Do not use rechargeable batteries or any
other type of batteries because they supply lower voltage and
the unit will not perform properly. Never mix old and new
batteries together or different brands or types together.
2. The battery compartment is located in the back of Minnie’s
head. Carefully turn Minnie over to reveal the battery
compartment cover. Using a Phillips head screwdriver
unscrew the cover screws and install 3 AAA batteries, paying
close attention to proper (+) and (-) battery polarity.
3. Replace the battery compartment cover and secure with the
screws. Connect to any external capability switch (not
included) via the jack located on the side of Minnie. Minnie
Bubble Blower is equipped with a 1/8
″
jack for use with
external capability switches with a 1/8
″
plug. Make sure you
have your switch plugged in all the way. There should be no
gaps.
4. The Bubble solution container is the bottom part of Minnie.
Just unscrew the bottom of Minnie and fill with bubble
solution. Follow the original manufactures instructions for
installing.
5. Minnie Bubble Blower can be used with or without an external
switch. The ON/OFF switch is Minnie’s mouse symbol on his
back. When using an external capability switch, the ON/OFF
switch needs to be set in the OFF position. Actuate your
external capability switch and the bubbles will start to flow!
Once you release your switch the bubbles will stop.
5. When finished playing with Minnie Bubble Blower turn him
OFF to prevent battery drain.
Troubleshooting:
Problem:
Minnie Bubble Blower does not function correctly.
Action #1:
Check that all the batteries are installed, following
proper (+) & (-) polarity. Also check that all batteries are fresh.
Action #2:
Replace the batteries paying close attention to proper
(+) and (-) battery polarity.
Action # 3:
Make sure you have enough Bubble solution in the
bubble solution tank.
Action #4:
Make sure that your switch is plugged into the jack all
the way. There should be NO gaps.
Action #5:
Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of the
problems.
Care of Unit:
If you will not be using Minnie Bubble Blower for an extended
amount of time, we recommend removing the batteries.
Minnie Bubble Blower can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple
Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge
the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
as they will scratch the surface
of the unit.
Rev 3/26/2021
