Enabling Devices Flip Flop 503 User Manual Download Page 2

Entertains for hours!

Entertains for hours!

Entertains for hours!

Entertains for hours!    

Our colorful Flip Flop is terrific to use for increasing visual attention 
and providing tactile stimulation. With a simple spin of the domes, you 
will feel vibration, see multi-colored lights flashing, colorful glitter and 
multi-colored beads spinning inside the dome, reflections in a mirror, 
and hear six high-fidelity upbeat songs. This versatile toy has two 
different on/off switches: one to control the music, the other to control 
the lights, vibration, and beads inside the domes. Size: 12"L x 8½"W x 
9½"H. Requires 4 C and 4 AA Batteries. Weight 2¾ lbs. 
1.

 

Flip Flop requires 4 C & 4 AA batteries (not included). Use Alkaline 
batteries only (e.g. Duracell or Energizer brand). Do not use 
rechargeable batteries or any other type of batteries because they 
supply lower voltage and the unit will not perform properly. There 
are to sets of battery compartments. One set is inside the dome, 
to access the compartments remove the two Phillips Head screws 
from dome (see fig.1 & 2 on back page of this guide) separate the 
two halves of the dome, Please Note: the  halves are connected  
by a cable  do not twist or try to separate the cable. Install the 4 C 
batteries and put the 2 halves back together and secure with 
screws. The second sets of battery compartments are located 
under the unit’s base. Gently turn the unit over to reveal the 
battery compartments. Carefully remove the small screw from 
each of the battery compartment covers using a Phillips head 
screwdriver, and then slide the battery compartment covers off. 
Install AA size batteries into each holder. When installing new 
batteries, always be careful to observe battery polarity. Replace 
battery covers and screws. Never mix old and new batteries 
together or different brands or types together. 

2.

 

Turn the ON/OFF/VOLUME knob clockwise, you will hear an 
auditable click. Adjust to knob for desired volume level of the 
music. Push the Push button ON/OFF switch on the dome which 
controls the lights, spinners and vibration. The Flip Flop can be 
used one of 3 ways. One with the music and the lights, spinners 
and vibration. The second with just the music and third with just 
the lights, spinners and vibration. 

3.

 

Simply rotate the dome and you will be rewarded with multi-
colored lights flashing, colorful glitter and multi-colored beads 
spinning inside the dome. The dome also vibrates. When the 

music switch is turned on and the dome is spun it will play a 
musical tune for about 10 to 15 seconds. When the tune finishes 
playing the next time the dome is spun a new tune will play. There 
are 6 different tunes. 

    
Troubleshoot

Troubleshoot

Troubleshoot

Troubleshooting:

ing:

ing:

ing:

 

 
Problem:

Problem:

Problem:

Problem: Flip Flop’s lights, spinners or vibration do not work when the 
dome is spun. 
    
Action #1: 

Action #1: 

Action #1: 

Action #1: Make sure the dome’s ON/OFF push button is turned ON. 
    
Action #2

Action #2

Action #2

Action #2::::  Check the Batteries for strength and for proper battery 
polarity. Replace if weak or dead. 
    
Problem:

Problem:

Problem:

Problem:    Flip Flop    does not play music. 
 
Action #1: 

Action #1: 

Action #1: 

Action #1: Make sure the ON/OFF/VOLUME knob is turned ON and 
set at an auditable level. 
    
Action

Action

Action

Action    #2

#2

#2

#2:::: Check the Batteries for strength and for proper battery 

polarity. Replace if weak or dead. 
    
Problem: 

Problem: 

Problem: 

Problem: Flip Flop    does not work at all. 
 
Action: 

Action: 

Action: 

Action: Check all Batteries for strength and for proper battery polarity. 
Replace if weak or dead. 
    
Care of the Unit:

Care of the Unit:

Care of the Unit:

Care of the Unit:    
Flip Flop can be wiped clean with any household multi-purpose, non-
abrasive cleaner and disinfectant. We recommend Simple Green, 
which is a non toxic biodegradable all-purpose cleaner. 
 
Do not use

Do not use

Do not use

Do not use abrasive cleaners, as they will scratch the surface of the 
unit. 
Do not submerge

Do not submerge

Do not submerge

Do not submerge the unit, as it will damage the electrical 
components. 

Rev 

Rev 

Rev 

Rev 1/25/17

1/25/17

1/25/17

1/25/17    

Reviews: