Nemo and Dory!
Have endless bubble fun with your favorite Finding Dory characters.
Eight rotating wands blow hundreds of bubbles when you activate
your capability switch. Includes 4 oz. bottle of bubbles. Size: 7"L x
6½"W x 9"H. Requires 4 AA Batteries. Weight: 1½ lbs.
Operation:
1.
Finding Dory Bubble Blower requires 4 AA batteries (Not included)
to operate. Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or
different brands or types together.
2.
The battery compartment is located under bubble blower’s base.
Carefully turn the bubble blower over to reveal the battery
compartment cover. Using a Phillips head screwdriver unscrew
the cover screw and install 4 AA batteries, paying close attention
to proper (+) and (-) battery polarity.
3.
Replace the battery compartment cover and secure with the
screw. Connect to any external capability switch (not included) via
the jack located at the back of the bubble blower’s base. Finding
Dory Bubble Blower is equipped with a 1/8" jack for use with
external capability switches with a 1/8" plug. Make sure you
have a tight connection. There should be no gaps.
4.
Finding Dory Bubble Blower can be used with or without an
external switch. The ON/OFF switch is located in the back of the
base unit. When using an external capability switch, the ON/OFF
switch needs to be set in the OFF position. Actuate your external
capability switch and the bubbles will start to flow! Once you
release your switch the bubbles will stop.
5.
When finished playing with Finding Dory Bubble Blower turn OFF to
prevent battery drain.
Troubleshooting:
Problem:
Finding Dory Bubble Blower does not function correctly.
Action #1:
Check that all the batteries are installed, following proper
(+) & (-) polarity. Also check that all batteries are fresh.
Action #2:
Replace the batteries paying close attention to proper (+)
and (-) battery polarity.
Action # 3:
Make sure you have enough Bubble solution in the
dipping troth. The Bubble solution should cover the Bubble Dippers
completely.
Action #4:
Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO gaps.
Action #5:
Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
If you will not be using Finding Dory Bubble Blower for an extended
amount of time, we recommend removing the batteries.
Finding Dory Bubble Blower can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple Green,
which is a nontoxic biodegradable all-purpose cleaner.
Do not submerge
the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
as they will scratch the surface of the
unit.
Rev 1/5/2017