Bow Wow!
Take your German Shepherd Puppy for a walk. He moves and
wags his tail while barking. He is a wonderful pet to have, so
soft and cuddly, and helps to increase directionality skills. Size:
7½"L x 3¾"W x 7"H. Requires Capability Switch and 2 AA
Batteries. Weight: 1 lb.
Operation:
1. German Shepherd Puppy requires 2 AA Batteries to operate.
Alkaline batteries must be used (e.g. Duracell or Energizer
Brands). Do not use rechargeable batteries because they
supply a lower voltage and the unit may not perform as well.
Never mix old and new batteries together or different brands
or types together.
2. Turn German Shepherd Puppy upside down to reveal the
battery compartment. Remove the small screw with a Phillips
Head screwdriver. Install 2 AA batteries paying close
attention to proper battery polarity. Replace the battery
compartment cover and screw.
3. Connect Puppy to any external capability switch (not
included) via the jack located at the end of Puppy’s cord.
German Shepherd Puppy is equipped with a 1/8" jack for
use with external capability switches with a 1/8"plug. Make
sure to make a tight connection. There should be no gaps.
4. Actuate your external capability switch and St. Bernard
Puppy will spring to life! He walks forward, backwards, barks
and wags his tail.
5. German Shepherd Puppy will remain on while the external
capability switch continues to be actuated. Once you release
the external capability switch Puppy will turn off.
Troubleshooting:
Problem:
German Shepherd Puppy does not function correctly.
Action #1:
Replace the batteries paying close attention to
proper (+) & (-) battery polarity.
Action #2:
Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO
gaps.
Action #3:
Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of
the problems.
Care of Unit:
Do not inhibit German Shepherd Puppy’s movement, as this
may cause irreversible damage.
Do not lift German Shepherd Puppy up by his head, tail or
legs, or drop German Shepherd Puppy.
If you will not be using German Shepherd Puppy for an
extended amount of time, we recommend removing the
batteries.
Do not submerge
the unit in water, as it will damage the
electrical components. Puppy is surface washable only.
Rev 2/16/2022
