•
Dip Switch 4: This toggles the Signal Noise Ratio (SNR). Default is set to 9dB which is
excellent for long distance communications whereas flipping the switch Up (OFF) toggles
6dB mode. If you experience issues of noise bleeding over the lines or high interference
in your environment it is suggested that you switch to 6dB mode and change to interleave
mode. This will help clean up any noise bleeding over your cabling.
Default DIP settings
860C Pro CPE – All down set in the ON position
860C Pro CO – DIP position 1 up (OFF)
DIPs 2-4 down (ON)
