Performing the On-Site Installation
After removing the Enable-IT 828W Weatherproof PoE Extender Unit from the box, and
performing the Out Of The Box Testing (OOTBT), all that remains to install the unit on-site is
to mount the unit, attach the LAN device cabling through the open end screw caps, use the
grey sealant around the inserted Ethernet RJ45 LAN cable (inside the screw cap) and
securely tighten the screw caps.
Mounting the Enable-IT 828W Weatherproof PoE Extender Unit Units
The Enable-IT 828W Weatherproof extended Ethernet solution is designed for quick wall
mounting. Choose a location to mount each of the Enable-IT 828W Weatherproof’s where
the maximum distance does not exceed 400ft or 121m from your PoE injector and or the end
PoE device or next 828W unit - (See diagram below). When wall-mounting the Enable-IT
828W Weatherproof unit it is recommended that you use the appropriate screw anchors for
your mounting surface. If mounting on existing plywood use wood screws; if mounting onto
drywall or sheetrock, use plastic drywall anchors to secure your installation.
T
ECHNICAL
S
UPPORT
Enable-IT, Inc.’s Customer Care Team support is available directly to customers and distributors. All
support requests are processed through the online support portal. This allows us to provide
assigned support ticket numbers in order to bring closure to any technical issues.
Online Technical Services
The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please
use this support website as your first source for help as it contains an on-line knowledge base of
articles, documentation, FAQ's and other problem-solving resources. This web-based support
resource provides the quickest solution to the most common technical support issues.
World Wide Web Site
https://enableit.com/customer-care-support
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
3
5