Programming Instructions
1. Move the O N / O F F sliding switch to the O N position, the display is activated.
Now the timer is switched ON.
2 .
While pressing continuously on the C L O C K push-button, set the day by depressing the D AY push-button
as many times as necessary to set the correct day.
3. While pressing continuously on the C L O C K push-button, set the hours by depressing the H O U R p u s h - b u t t o n
as many times as necessary to set the correct hours.
4 .
While pressing continuously on the C L O C K push-button, set the minutes by depressing the M I N. push-
button as many times as necessary to set the correct minutes.
Now the clock is set to the right day and time.
5. Press the P R O G push-button to start the programming of the timer. Program 1
O N
is the time when the
relay will be activated on the selected days.
6 .
Set the day or days you want to program by pressing the D AY push-button. Pressing the D AY push-button
will move the timer from one day to the other until you reach the block of days that can be programmed.
7 .
Set the time when the relay will be activated by pressing the H O U R and M I N p u s h - b u t t o n s .
8 .
Press the P R O G push-button to continue to set the timer to O F F period. Set day as in step 6.
9 .
Set the time when the relay will be de-activated by pressing the H O U R and M I N
1 0 . Continue the setting of up to 6 O N / O F F periods per week the same way as above.
11 . At the end of programming, press the C L O C K p u s h - b u t t o n
N O T E :
Use O N / A U T O / O F F to toggle the relay between O N, timer program and O F F.
DTM-9 SEVEN DAY ELECTRONIC TIMER
Technical Information
POWER SUPPLY
24V AC or DC, 120V AC, 220V AC
POWER SUPPLY TOLERANCE
+ / - 20% from the power rating
STAND-BY CURRENT
60 mA maximum
ON CURRENT
75 mA Maximum
RELAY TYPE
SPDT
RELAY RATING
15A 24V DC 120V AC
TEMPERATURE RANGE
-40°F to 170°F
POWER INDICATOR
RED LED is on when relay is activated
SURGE PROTECTION
MOV protection Devices
CONTROL UNIT HOUSING
Break resistant Polycarbonate; H:4.0” W: 2.75” D: 2.25”
CONNECTOR
Protected terminal strip
MOUNTING
DIN rail and flash mount bracket is provided
Ordering Information
DTM-9
Voltage for example: DTM-9-24V AC for 24V AC Power Supply
