Emulex Printer Server, Command Reference Manual

Page: 14 / 51

8 Command Reference Guide
help 10
initialize [ server ] [ delay delay_min ] [ cancel ]
[ flash ] [ default ] [ disabled ]
11
logout [port port_num
]
12
ping ip_address 12
set server privilege password “pass_txt ” 13
set server prompt “prompt_txt” 25
show node node_name [ gateway
|
syslog | nfserver
| npserver ]
14
show port port_num characteristics 17
show port port_num fonts 28
show port port_num status [netjet |device] 20
show server alarms 21
show server appletalk 27
show server characteristics 22
show server config [port
port_num
] [
ps ]
22
show server LAT 30
show server limits 23
show server netbios 27
show server netware 32
show server network 22
show server status 22
show server tcpip 38
show service “servc_name” characteristics 45
su 12
sync 12
test port_num count count_num 17
In the remaining portion of this guide, commands are grouped by their
effect.