OneConnect OCe14000-series Adapters Installation Manual
P009818-01A Rev. A
2. Installation
Applying Power
15
.
Figure 2-6
Connecting a DAC Cable
2. After the appropriate cable is connected to the adapter, connect the other end of the
cable to a suitable device, such as a Top of Rack (TOR) EE switch.
After the device is connected to the adapter, you are ready to apply power to the
computer. See “Applying Power” on page 16.
Emulex OneConnect Accessories
Table 2-2 provides model number, name, interface and required quantities if you want
to order additional or replacement transceivers, or cables.
Applying Power
To apply power:
1. Verify that the adapter is securely installed in the computer.
2. Verify that the correct device is attached.
3. Plug in and turn on the computer.
4. Observe the boot banner for Power On Self Test (POST) results.
Table 2-2
Emulex OneConnect Accessories
Model Number
Model Name
Quantity
Interface
OC10-SR-OPT-1
Emulex OneConnect 10Base-SR
Optical SFP+ Transceiver
1 pc
10Gbase-SR Optical
OC10-SR-OPT-2
Emulex OneConnect 10Base-SR
Optical SFP+ Transceivers (2 pcs)
2 pcs
10Gbase-SR Optical
OC10-LR-OPT-1
Emulex OneConnect 10Base-LR
Optical SFP+ Transceiver
1 pc
10Gbase-SR Optical
OC40-SR4-OPT-1
Emulex OneConnect 40Base-SR4
Optical QSFP+ Transceiver
1 pc
40Gbase-SR4 Optical
