LPe15004, LPe16004, and LPe16000B-series HBA Installation Manual
P008875-02A Rev. A
3. References
LPe15004, LPe16004, and LPe16000B–series HBA Specifications
15
3. References
LPe15004, LPe16004, and LPe16000B–series HBA
Specifications
The specifications of the LPe15004, LPe16004, and LPe16000B–series HBAs are listed in
Table 3-1.
Table 3-1
LPe15004, LPe16004, and LPe16000B–series HBA Specifications
Parameter
Range
Physical Dimensions
LPe16000B-series and LPe15004 HBAs: Low-profile form factor, 6.600 inches
by 2.731 inches.
LPe16004 HBA: Standard height, half length form factor, 6.600 inches by 4.376
inches.
Power Requirements
Single channel LPe16000B HBA: 9.3W (typical), 11.6W (maximum)
Dual channel LPe16000B HBA: 11.1W (typical), 13.3W (maximum)
Quad channel LPe16004 HBA: 22.4W (typical), 25.0W (maximum)
Quad channel LPe15004 HBA: 11.5W (typical), 14.2W (maximum)
Power Susceptibility
The LPe16004,LPe16000B–series, and LPe15004 HBAs can operate within the
following voltage ranges:
PCIe 3.3V: 3.3V +/- 9%
PCIe 12V: 12V +/- 8%Power supply noise susceptibility: 100mV p-p at
frequencies 100KHz or less
Airflow
200 linear feet per minute (minimum, LPe16000B–series and LPe15004 HBAs)
250 linear feet per minute (minimum, LPe16004 HBA)
Temperature
0°C to 55°C (operating,LPe15004)
0°C to 50°C (operating, LPe16004 and LPe16000B–series HBAs)
-40°C to 70°C (storage, LPe15004, LPe16004, and LPe16000B–series HBAs)
Note:
Operating HBAs in higher temperature conditions may result in early
failure.
Humidity
LPe16004 and LPe16000B–series HBAs:
5% to 95% (non-condensing, 22°C wet bulb) for storage
10% to 90% (non-condensing, 22°C wet bulb) for operation
LPe15004 HBA:
5% to 95% (non-condensing, 23°C wet bulb) for storage
10% to 90% (non-condensing, 23°C wet bulb) for operation
