LightPulse Fibre Channel PCI Host Adapter Management Page 2 of 7
Copyright Emulex Corporation - All rights reserved - 1999
Host Adapter Function Buttons
These functions can be viewed and or executed as long as the adapter is installed. Execution of
these functions take effect immediately.
l
Remove Adapter
- Removes previously installed adapter information.
l
Firmware
- Download new firmware to the host adapter.
l
Memory
- View the host adapter memory.
l
Reset Bus
- Emulate a SCSI bus reset using the host adapter.
l
Network
- Select and view the host adapter networking parameters.
Remove Adapter
The Remove Adapter button is used to delete a host adapter's entry from the registry. This
can only occur after the physical removal of the host adapter. When the adapter is
physically present in the bus, the Remove Adapter button is grayed out (disabled).
Firmware
The Firmware button is used to download a new firmware image into the host adapter's
flash ROM. Firmware images can be downloaded from the Emulex FTP site. The
firmware will be verified, downloaded, and the adapter restarted.
