LP21000 and LP21002 Hardware Installation Manual
Page 8
References
Specifications
Table 4. LP21000 and LP21002 Specifications
Parameter
Range
Media Interface
The EE NIC and Fibre Channel components interface to the physical media
interface through a FCoE bridge chip, and then connect through either single/dual
port 10 Gigabit optical fiber or copper LC connectors to the Enhanced Ethernet.
Physical Dimensions
Standard PCIe form factor PCBA; full height, 9.1".
Power Requirements
Dual Port: 25 Watts
Single Port: 23 Watts
Airflow
150 lf/min (minimum)
Temperature
0°C to 55°C (+32°F to +131°F)
Humidity
5% to 85% (non-condensing)
40°C, 16 hour dwells at extremes
Agency Approvals for
LP21000 and LP21002
TBD
Vibration, peak
acceleration
0.25g (5 Hz to 500 Hz)
(Sweep Rate = 1 octave/min.)
ROHS Compliance
Same as HBAs
