Laser Safety Notice
This laser safety information contains certification and product information covering
laser products known as optical Gigabaud Link Modules (GLMs), Gigabit Interface
Converters (GBICs), 1x9 and small form factor transceivers sold as accessories to or
incorporated in Emulex LightPulse host adapters. The GLM, GBIC, 1x9 and small form
factor transceiver are the primary cable connection mechanisms for any optical port on
the host adapter and hub. This data is not intended to be a replacement for any safety
regulations and standards; relevant safety documents should always be consulted if
necessary. Contact Emulex Corporation with any questions or concerns about laser
safety.
Certification and Classification
Labeling Requirements
Product Information
Usage Restrictions
System Level Certification
Certification and Classification
LP6000 and LP7000E PCI host adapters may contain a laser product known as an
optical Gigabaud Link Module (GLM). The optical GLM is attached to the host
adapter using an 80-pin connector and extends through the mounting bracket. In
turn, the host adapter can be inserted into any host system's PCI slot.
The LH5000 hub may contain a laser product known as a Gigabit Interface
Connector (GBIC). The GBIC provides the physical connector to the optical cable.
The GBIC can be inserted into any pluggable hub port.
The LP8000, LP850 and LP9000 PCI host adapter may contain a laser product
known as a Gigabit Interface Converter (GBIC) or an embedded 1x9 transceiver.
The GBIC and or 1x9 transceiver provide the physical connection to the optical
cable, and its SC-style connector extends through the mounting bracket. In turn, the
host adapter can be inserted into any host system’s PCI slot.
The LP9002, LP9002L, LP952L, LP9002S, LP9002DC, LP9002C, LP9402DC,
LP9802, LP982, LP9802DC, LP10000, LP10000DC, LP1050DC and LP1050 host
adapters may contain a laser product known as a small form factor transceiver. This
transceiver provides the physical connection to the optical cable, and its LC-style
connector extends through the mounting bracket. In turn, the host adapter can be
inserted into any host system's appropriate PCI/PCI-X/cPCI/SBus expansion slot.
Emulex Documentation, Drivers and Software
16
