Incorrect
Assembly
Correct
Assembly
Assembly:
Insert groove of collet into the eccentric ring of nut by tilting collet towards mark on
bottom of nut. Then push collet towards opposite side of nut until it clicks into place. Hand screw nut
with collet onto tap holder, then insert machine tap to proper seating depth. We recommend final
tightening of the nut with torque wrench and tightening fixture.
Disassembly
: After the nut assembly is unscrewed from the tap holder, press on the collet face while
simultaneously pushing side ways on the back of the collet towards the mark on bottom of nut until
It disengages from the clamping nut..
Mark
on
Bottom
Collet/Nut Assembled
Assembly of ER-GB Collet and Clamping Nut
Press collet towards opposite
side of nut until it clicks into
place.
Tilt
