Softsynchro
®
6
8
Operating instruction edition: 01.04.2018
2.2.1 Assembly of the coolant-lubricant tube for quick-change tap holders with
hollow taper shank (according to DIN 69893-HSK-A)
a) Components
b) Prepare of coolant-lubricant tube
1. Slide on the both O-rings
2. Slide on thread nut
c) Mount coolant-lubricant tube in the shank
Note
Required tool:
Choose appropriate assembly wrench for the shank size
(For the assembly wrench please refer to the EMUGE main catalogue, category
accessories)
1.
Plug assembly wrench on
the coolant-lubricant tube
Watch the position of the
pins to the grooves!
2. Screw coolant-lubricant
tube in the shank
Pins
Groove
Coolant-lubricant tube
O-ring small
cross-section
O-Ring big
cross-section
Thread nut
O-ring big cross section
O-ring small cross section
