GETTING TO KNOW YOUR EMU
V-CLA-MK3-1
www.emubikes.com
6
Correct care and storage:
When not in use, store your battery at room
temperature at an approximate charge of
between 30-60%. Fully charge before each
use. Regular charging is best for
maintaining a long service life.
4. GETTING TO KNOW YOUR EMU
Stem, Handlebar & Display angle
1.
Stem angle
– To adjust the tilt on the Emu quill stem you need to loosen the
single bolt located underneath the stem. Once the bottom bolt is loosened you
can adjust the angle of the stem to a more flat or upright riding position.
Retighten the bolt securely to the recommended torque.
2.
Handlebar angle
– To adjust the angle of the handlebars, loosen the
handlebar bolts using the 5mm Allen key and move the handlebars to a
comfortable riding position. Tighten the bolts to 10Nm
3.
Display
– Loosen the handlebar display clamp
screw with the 3mm hex key and adjust the
handlebar display position as necessary. Tighten
the screw securely to 2-3Nm.
4.
Brake lever angle
– Loosen the brake lever
clamp screw with the 5mm hex key to adjust the
brake lever position.
The rider’s fingers, hand and
lower arm should be in a straight line when sitting
on the saddle. Tighten screw to 6-8Nm. The bell is
integrated into the brake lever.
Storage of your battery fully
charged or fully discharged for
extended periods can shorten the life
of your battery.
Long periods without charging
may shorten the life of your
battery (even with no use a battery life
reduces with time).
Do not
loosen the bolts on
the side of the stem;
these are pivot points and allow
the stem to tilt up and down.
Overtightening the display
mount bolt may break the
mount.
Do not overtighten
.
