Configuration
Copyright © 2010 by EMTrust GmbH All rights reserved
User Manual - CP75X
70
6.5.2 Onboard Device
Settings to enable or disable the Onboard Devices.
_
Phoenix - AwardBIOS CMOS Setup Utility
_
Onboard Device
_
╔══════════════════════════════════════════════════╤════════════════════════╗
_
║
Front ETH1 GbE Device
[Enabled, w/PXE]
│
Item Help
║
_
║
Front ETH2 GbE Device
[ Enabled]
├────────────────────────║
_
║
Rear I/O GbE Device
[ Enabled]
│
Menu Level
►
║
_
║
Front 8HP GbE Device
[ Enabled]
│
║
_
║
│
Enable or disable the
║
_
║
HD Audio Controller
[Auto]
│
onboard ethernet
║
_
║
│
controller
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
╚══════════════════════════════════════════════════╧════════════════════════╝
_
↑↓→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:EXIT F1:General Help
_
F5: Previous Values F7: Defaults Settings
_ _
Fig. 59:Onboard Device Page
Front ETH1 GbE Device
Three options are available: [Enabled], [Enabled, w/PXE]
and [Disabled].
The default setting is [Enabled, w/PXE]. This enables
network boot-up with PXE protocol.
[Enabled] activates the GbE Device without PXE protocol.
[Disabled] deactivates the GbE Device.
Front ETH2 GbE Device
Two options are available: [Enabled] and [Disabled].
The default setting is [Enabled].
Rear I/O GbE Device (only with Rear I/O
module)
Two options are available: [Enabled] and [Disabled].
The default setting is [Enabled].
Front 8HP GbE Device (only 8HP)
Two options are available: [Enabled] and [Disabled].
The default setting is [Enabled].
