11
IN8-EMTOUCHLL
10/22/2012
Restoring the Lock to Factory Default Setting
• Press and hold EMTEK button for 3 seconds.
• Enter
“
000000
”
• After 2 beeps and 2
Green
LED Flash, remove power (disconnect 9V battery)
from Lock.
• After 5 seconds, restore power (reconnect 9V battery)
• Confirm by 2 beeps and 2
Green
LED Flash.
This procedure clears the lock of all users and restores the Programming Code and
2 User Codes shipped with the lock.
Function
Indicators
Valid Code
• 1 short beep, EMTEK button flashes
Green
.
Invalid Code/Access Denied*
• 1
Red
LED flash
• 2 short beeps
Lock-Out Mode Error
• 2 short beeps
• 1 short beep per second for duration
Access Accepted
• 1 short beep
• 1
Green
LED flash
Low Battery
• 4
Red
LED flashes
• 4 short beeps
Blackout Battery
**
• 1 long
Red
LED flash
• 4 long beeps
Button Press Accepted
• 1
Yellow
LED flash
• 1 Short Beep
Outside Thumb Turn Enabled
• 2
Green
LED flashes
* If 3 consecutive incorrect codes are entered, the lock emits 4 short beeps and a flashing
Red
EMTEK
button. The lock will not accept additional input for 20 seconds (20 beeps). When the next valid code is
entered the lock will beep quickly 3 times to alert of the incorrect codes.
** Battery voltage has dropped too low; keypad will be disabled but metal key override will still work.
Keypad Operation - Beeper & LED Indicators
Place Sticker Here
U.S. patent: 8,176,761
International patents pending.