Emtec MOVIE CUBE, User Manual

Page: 18 / 39

1.2.3 Windows 2000, XP
1) After connecting EMTEC MOVIE CUBE, windows
itself will install driver automatically. And then, check
the driver installation at Windows [Start > Settings >
Control panel > (switch to classic View on Windows
XP) > system > Hardware > Device manager >
Universal Serial Bus controllers > USB Mass Storage
Device ].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
3) After copying data, remove EMTEC MOVIE CUBE
with using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
EMTEC MOVIE CUBE may have damage.
9 When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when
you plug EMTEC MOVIE CUBE into USB 1.1 spec. Host
9
If new volume is not be appeared, check HDD format
or not. and HDD file system. Windows 2000, XP detect
both FAT32 and NTFS file system. Or connect power
cable of EMTEC MOVIE CUBE.
17