(4) Click the “OK” icon.
Question 7. During power on, why does the TV will have a short flashing, blue
screen or screensaver?
Answer:
This is normal, when the system initializes, it will setup the corresponding
parameters so it can output the correct video signal to the TV, during the initializing
time, the TV will receive incorrect signals or the signals will not be stable and will
cause the TV screen to flash, some TV’s will treat this as no signal, and will display a
blue screen or screensaver.
Question 8. Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the TV
screen display an unwatchable picture?
Answer:
Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if
your TV does not support, please use the A/V signal display instead, press the TV
SYSYEM button on the remote control, then switch the TV’s video input to NTSC or
PAL.
Question 9. Why is there no sound on movie or music playback when using Y/Pb/Pr
component output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals, when
using Y/Pb/Pr output, please plug the A/V OUT or the S/PDIF jack to output sound.
Question10. Why couldn’t the player find the hard disc?
Answer:
Make sure the firmware is installed correctly, and no system partitions on the HDD
were deleted. If hard disc failure occurs, please backup your data and reinstall the
firmware.
Question11. While playing movies in the multimedia partition, buttons like PREV,
NEXT, A-B, etc. sometimes could not be used.
Answer:
The above functions are designed for IFO (DVD) files only.
