- 19 -
c. Using
the
Up/Down
keys, navigate to “System Setup”. Press and release
OK
key. “Vol/Mute
Control Setup” is displayed.
d. Using
the
Up/Down
keys, navigate to “Language Setup”. Press and release the
OK
key.
e.
The “Language?” screen is displayed with the current language flashing. Use the
Up/Down
keys
to select desired language. The default language is English. Press and release the
OK
key.
f.
The “Confirm English” screen is displayed. Press and release the Okay key.
g.
“Success” will be displayed and the remote will remain in Setup, returning to the “Code Setup”
screen.
6.6 System Reset
To reset the LCD remote back to factory default settings. All User programmed parameters e.g. code
settings, learned commands, Macros, etc., are cleared to their respective default
settings.
a.
Press and hold
S
key until “Code Setup” is displayed (takes approximately 3 seconds).
b. Release
S
key.
c. Using
the
Up/Down
keys, navigate to “System Setup”. Press and release
OK
key. “Vol/Mute
Control Setup” is displayed.
d. Using
the
Up/Down
keys, navigate to “System Reset”. Press and release the
OK
key.
e.
“Confirm OK to Reset” is displayed. Press and release the
OK
key.
f.
“Please Wait” will be displayed while all parameters are Reset then the remote will exit Setup
and return to normal operation.
7. Timer Setup
Pressing
OK
at TIMER SETUP accesses the available Timer Options. These are a TV Sleep Timer and 4
Timers that can send a sequence of up to 3 key commands at the preset time.
7.1 TV Sleep Setup
The LCD remote can be programmed with a TV Sleep Timer. At the end of the set
Timer period, the LCD remote sends the Power command for the TV Mode device.
The TV Sleep Timer can be set for a period of 1-90 minutes. The “Zzz” symbol is
displayed when a TV Sleep Timer is set.
To set a TV Sleep Timer (no “Zzz” in normal display)
a.
Turn on the TV Mode device.
b.
Press and hold
S
key until “Code Setup” is displayed (takes approximately 3 seconds).
c. Release
S
key.
d. Using
the
Up/Down
keys, navigate to “Timer Setup”. Press and release
OK
key.
e.
“TV Sleep Setup” is displayed. Press and release the
OK
key.
f.
“TV Sleep Set” is displayed. Press and release the
OK
key.
g.
“TV Sleep Time?” is displayed with “minutes” flashing. Use the
Up/Down
keys to set the
minutes then press and release the
OK
key.
h.
“Success” will be displayed and the remote will remain in Setup routine, returning to the “Code
Setup” screen.
i.
Press and release Exit key to return to normal operation. Leave the remote pointing at the TV
device.
To clear a TV Sleep Timer (“Zzz” in normal display)
a. Press and hold
S
key until “Code Setup” is displayed (takes approximately 2-3
seconds).Release
S
key.
b. Using
the
Up/Down
keys, navigate to “Timer Setup”. Press and release
OK
key.
c.
“TV Sleep Setup” is displayed. Press and release the
OK
key.
d.
“TV Sleep Clear” is displayed. Press and release the
OK
key.
e.
“Confirm OK to Clear” is displayed. Press and release the
OK
key.
f.
“Success” will be displayed and the remote will remain in Setup routine, returning to the “Code
Setup” screen.
7.2 Timer Setup
The LCD remote can be programmed with up to 4 Timers (Timer1, 2, 3 & 4). Each
Timer can be assigned up to 4 keys to activate at the set time (e.g. to change SAT
Mode channel to 123 at 22:35). The first key must always be a Mode key. Subsequent
keys cannot include Up, Down, Left, Right, OK, Exit, Macro, Setup or any Mode key.
Timers can only be set to activate within the following 24-hour period. Timers are
automatically cleared after activation. The “Timer Bell
” symbol is displayed when
any Timer is set.
X=1,2,3,4
X=1,2,3,4
Y=1,2,3
OR
OR
