The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in
numerous frames by different manufactures as below list:
Mounting
BEKER
S1, B1, B3, B7 glass
GIRA
Standard55, E2, Event, Esprit
JUNG
A500, Aplus
MERTEN
M-smart, M-Arc, M-Plan
Operation
1. Pairing with remote: connect well receiver, press learning key
on receiver,then immediately push or ,the led will flash, means
well paired. One remote can pair with endless of receivers, to
control in sync.
Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
On/Up
Off/Down
2. Short press for ON,long press for turn Up brightness.
short press for OFF, long press for turn Down brightness.
3. If you want delete the receiver's learning data, just long press
for 5 seconds the learning key on receiver, the receiver will be
deleted the learning, be set as factory defaults.
Think ahead ESC GmbH I Anzengruberstr. 39 I A-9020 Klagenfurt a. W. I T +43 (0)463 21 09 46 I [email protected] I www.think-ahead.at
