10
INSTALLATION
Hardware Installation
1.
Connect the power adapter to the drive.
External Power
AC IN 100-240V DC OUT + 5V
2. Attach the USB 2.0 cable to the mini USB 2.0 connector on the
rear panel of the drive.
USB Connector
3. Attach the other end of the USB 2.0 cable to the USB port in your
computer. The drive is now ready to use.
If you are installing a USB 2.0 drive, your computer must have a USB
2.0 port to reach the highest speed. You may experience slower USB
2.0 drive performance if it is connected to an USB 1.1 port
.
Note:
♦
Be sure to use the USB 2.0 cable & the power adapter (DC IN +
5V) bundled with the drive.
♦
Never plug or unplug in any other USB device while the drive is
transferring data. It’s likely to lose data.
♦
It’s advisable not to disconnect the drive or unplug the power to
the drive while a disc is inserted.
♦
Do not connect more than two rewritable optical drives to USB
ports of the computer.
