4
INSTALLATION
Hardware Installation
1. Connect the power adapter to the drive.
External Power
AC IN 100-240V to DC OUT + 5V
2. Attach the USB 2.0 cable to the mini USB 2.0 connector on the
rear of the drive.
USB Connecto
r
3. Attach the other end of the USB 2.0 cable to the USB port in your
computer. The drive is now ready to use.
If you are installing a USB 2.0 drive, your computer must have a
USB 2.0 port to reach top speed. You may experience slower USB
2.0 drive performance if it is connected to USB 1.1.
Note:
♦
Be sure to use the USB 2.0 cable & the power adapter (DC IN +
5V) packed with the drive.
♦
Never plug or unplug in any other USB device while the drive is
transferring data. It’s likely to loss data.
♦
It’s advisable not to disconnect the drive or unplug the power to
the drive while a CD is inserted.
