10
I. Setting the Network configuration
In order to receive the internet radio program,
IRX
needs to connect to the
internet. You can connect the
IRX
in you LAN, either by Ethernet cable or
WiFi connection.
A. Network connection
You can use an Ethernet cable to connect the
LAN
port of
IRX
and a LAN
port of your router.
Note:
Your router should be setup to be able to link to your Internet
Service Provider.
If your router supports DHCP, then IRX can get an IP address automatically.
From the
Main menu
, press
,
key to select "
Configuration
" item, press
ENTER
or
key to enter the
Configuration
menu. Select "
Network
" and
press
ENTER
or
key to enter the
IP Configuration
submenu. Select
"
Auto Setting(DHCP)
", press
ENTER
or
key to enable the
Auto Setting
.
Note:
The above steps will be abbreviated as
"Configuration
Network
IP Configuration
Auto Setting (DHCP)"
in this
manual.
Otherwise, you can set the IP address manually. From the
Main menu
,
select
"Configuration
Network
IP Configuration
Manual Setting
IP Address "
to set the
IP address
. And then input the
Subnet Mask,
Default Gateway,
and
Preferred DNS Server
from the same menu screen.
Note:
Please use ,
keys to change the value of
IP address, Subnet
Mask, Default Gateway,
and
Preferred DNS.
ENG
L
ISH
(G
B)
Summary of Contents for IRF
Page 2: ......
