23
4.
After modifying the recording parameters, you may click "EXIT" to back to the
preview mode.
■
Recording:
Press “REC” to start to record the video clips and press
“■＂
to stop recording and
back to the preview mode.
■
Save:
Your recorded file will be saved at the “X:\Movie\Rec\RExxxx.AVI” in the first partition
of HDD in BPR-101. “X” represents the driver code while “xxxx” represents the serial
number, which will be increased automatically as the saved files increase.
■
Indicators:
BPR-101 can show different operation states by following two LEDs:
1. Record LED 2. Error LED.
■
Operation state descriptions:
Record LED
Error LED
Record preview
On
Off
Record Start
＆
running
Flash Off
Record error
Off
Flash
Other state
Off
Off
Notice:
1. If the HDD is full during the recording, the screen will show:
“The disk is full! Press any key to exit.”
2. If the recorded video clip is more than 2GB, the system will stop recording
and continue to save the rest recorded video clip in another file
simultaneously.
If you plan to record the TV programs, please refer to connection illustration
in page 17. For there is only one TV, you cannot check through the recording
image by the same TV. Please follow the following operation instructions.
Operating Instructions:
1. Connect your BPR-101 to your TV as page 17 illustrates and turn on the power of
BPR-101 and TV.
2. Please make sure to turn your TV to the program channel you want to record.
3. Press “REC” key to start recording the TV programs into your BPR-101. The
Record LED will keep flashing during recording.
4. Press key “
■
” to stop recording.
