Controls at a Glance
Power:
9V DC negative
tip 2.1mm jack. 30mA or greater
+
Depth:
The amount of tremolo
effect applied to signal
Rate/Ratio:
When in normal or two speed mode,
this is the rate or speed of the tremolo effect.
When in tap tempo mode, this sets the ratio of foot
taps to tremolo pulses. For example, at a 1:2 ratio,
the tremolo will do eigth notes when you tap
quarter notes.
Normal Mode:
The rate of the tremolo is controlled by the
rate knob.
Tap Tempo Mode:
The rate of the tremolo is set by taping
on the tap stompswitch twice. The ratio of foot taps to
tremolo pulses is set by the rate/ratio knob. The tremolo
averages the last 4 intervals tapped, so to get the most
accurate tap tempo, tap the tap stompswitch 5 times.
Two Speed Mode:
There are two separate tremolo rates
that can be chosen from. Both rates are settable. The rate is
set by the rate knob. Switching between tremolo rates is
achieved by hitting the tap stompswitch.
Tap Stompswitch:
Used to set the rate of the tremolo
effect when in tap tempo mode. When in two speed
mode it’s used to switch between speeds
Summary of Contents for tremolo
Page 1: ...user manual tremolo...
