Empire DVLXG55B, Homeowner'S Manual

Page: 7 / 13

7
If any of the original wire supplied with this unit must be replaced, order from an Empire dealer.
WIRING
1. Press remote sync button on the fireplace. (Black button)
2. Press the ON button on remote transmitter. An audible four beeps will be heard.
3. Should the SIT controller be replaced with a brand new controller then it may be nessecary to
hold down the GREEN button throughout the whole pairing proceedure above.
PAIRING THE REMOTE TRANSMITTER
1. Locate the cover on the base of the remote transmitter.
2. Remove the cover and replace existing batteries with three AAA batteries.
3. Replace cover.
REPLACE BATTERIES IN REMOTE TRANSMITTER
Black Sync Button
MAINTENANCE AND SERVICE
Green Black