35362-5-0217
Page 31
TOP View - Ember Placement Shown in Shaded Area
Figure 52
GLOWING EMBERS
Use only the amount of glowing embers supplied with your fireplace.
Applying excess glowing embers may adversely affect fireplace
performance. If you mix in platinum embers (for a distinctive glow),
remove a like amount of embers from the kit supplied with the
fireplace. Tear the embers into dime-size pieces and fluff each
piece to maximize the glow. Apply a single layer of embers in the
shaded areas below.
NOTE:
Replacement embers – either regular or platinum – must
be purchased from Empire Comfort Systems.
NOTE:
Embers break down over time. Remove old embers prior
to reapplication.
LINER PLACEMENT
NOTE:
Install Ceramic Fiber or Reflective Liner before plac
-
ing logs. Refer to the instructions that came with your Liner
for proper installation.