![background image](http://html1.mh-extra.com/html/empire-comfort-systems/vfp20in2-series/vfp20in2-series_owners-manual_2404007034.webp)
29829-14-1114
Page 34
PILOT FLAME CHARACTERISTICS
INTERMITTANT PILOT
Correct Pilot Flame Pattern
PILOT
SENSOR
IGNITOR
Figure 32
Incorrect Pilot Flame Pattern
PILOT
SENSOR
IGNITOR
Figure 33
If pilot flame pattern is incorrect, as shown in Figure 33.
• See Troubleshooting, page 39.
Cleaning and Pilot Maintenance
Oxygen Depletion Sensor Pilot (Figures 34, 35 and 36)
When the pilot has a large yellow tip flame, clean the Oxygen
Depletion Sensor as follows:
1. Clean the ODS pilot by loosening nut B from the pilot tubing.
When this procedure is required, grasp nut A with an open end
wrench.
2. Blow air pressure through the holes indicated by the arrows.
This will blow out foreign materials such as dust, lint and spider
webs. Tighten nut B also by grasping nut A.
Millivolt Pilot
Figure 34
B
A
Hydraulic Thermostat Pilot
Figure 35
A
B
Intermittant Pilot
Figure 36
Warning:
Never use needles, wires, or similar cylindrical objects to
clean the pilot to avoid damaging the calibrated ruby that
controls the gas flow.