31449-14-0116
Page 57
18. After all logs are properly positioned, place small "dime"
size pieces of Rockwool lightly across the front round
"blueflame" ports. Place the ember material (Rockwool
pieces) side by side. Do not stack more than one layer
of embers across the burner ports.
See Figure 65.
19. Replace glass door onto firebox.
20. Secure the two glass frame spring clamps at bottom of
firebox.
21. Align the tabs on top louver brackets with slots in front
posts to secure top louver.
22. Close bottom louver. Lift slightly to engage the end tabs
into the slots in fireplace sides to close louver panel.
Figure 65
ATTENTION:
Do not place decorative rock on logs or on
burner. The decorative rock should only be placed on the
fireplace floor.
WARNING
Failure to position the parts in accordance with this
diagram or failure to use only parts specifically approved
with this appliance may result in property damage or
personal injury.
Figure 66
Attention: Refer to Log Identification Page 41 and 42,
and Figures 67 and 68 to order logs.
Caution: If a log is broken, cracked or chipped, order a
replacement log. See page 58.
LOG PLACEMENT