29847-5-0719
Page 2
2
1
3
4
5
iteM no.
PArt no.
DesCriPtion
1
30605
Bracket, Blower
2
R12447
Blower Assembly
3
R7615
Cord Set
4
R7891
Ground Wire
5
R2142
#10 Screw
www.empirecomfort.com
empire Comfort systems inc.
Belleville, iL
If you have a general question
about our products, please e-mail
us at [email protected].
If you have a service or repair
question, please contact your dealer.
4. Replace the extension module mount plate, module and
extension module.
5. Plug the blower into the 3-prong receptacle on the
extension module labeled “fan”.
see Figure 3
.
120 VOLT AC
BLOWER ASSEMBLY
POWER CORD
MODULE
SECURE GROUND TERMINAL
UNDER A VALVE MOUNTING
SCREW
Figure 3
6. Remove one of the valve mounting screws. Locate the
ground wire ring tongue terminal and secure the ground
to the valve by re-installing the valve mount screw.
see
Figure 3.
7. Insert the power cord plug from the extension module into
the junction box at the right side of the fireplace.
8. Verify wiring connections did not get loose or disconnected
during blower installation.
9.
Replace glass door assembly, valve cover, and decorative
front.
exPLoDeD VieW AnD PArts List
SECURE GROUND
TERMINAL UNDER A VALVE
MOUNTING SCREW