19481-2-0115
Page 3
INSTALLATION
5. Install the Right Bifold Door assembly as shown in Fig
-
ure 4. With the door folded up, insert the bottom door
pivot pin into the receiving hole located in the firebox
bottom return flange. Swing the top of the door assem
-
bly outward and engage the top pivot pin into the hole
located in the spring clip. Adjust the spring clip left or
right with the door in the open position, then snug the
spring clip screws as necessary to check door align-
ment with the upper track. The gap above the door
should be equal across the top for proper door opera-
tion. Once adjusted as desired, gently open doors, then
tighten screws to secure spring clips.
Figure 4
DOOR OPERATION
OPERATE THE FIREPLACE WITH THE BIFOLD GLASS DOORS IN ONLY THE FULLY OPEN POSITION.
NOTE: Always close the mesh firescreens when operating the fireplace with the glass doors open.
FULLY OPEN DOORS
CORRECT DOOR POSITION WHEN
OPERATING THE FIREPLACE
Figure 6
PARTIALLY OPEN DOORS.
INCORRECT DOOR POSITION WHEN
OPERATING THE FIREPLACE
6. Repeat step 5 to install the Left hand Bifold Door as
-
sembly. Make adjustments as necessary on the bifold
doors to achieve the best alignment and operation.
Figure 5 shows the completed installation of the bifold
doors and canopy.
Figure 5
Figure 7
WARNING:
DO NOT operate the fireplace with the doors
partially open or closed. Operating the fireplace with the
doors partially open or closed creates a hazardous situa-
tion.
f i r e - p a r t s . c o m