Back Pain Relief Just Got Easier
Easy Steps to Get Started
Remove jewelry from area that will be covered by Empi EasyWear
Low Back Wrap.
Clean skin thoroughly with soap and water.
Place Empi EasyWear Low Back Conductive Wrap on flat surface.
Lightly mist each of the conductive electrode pads with the
conductive spray (3-4 sprays) and run your finger over the pad to
evenly coat the silver fabric.
Do not submerge the conductive
pad in water or in disinfecting chemicals.
Insert lead wire pins into the conductive garment electrodes.
Place conductive garment electrodes, with wires facing outward, in
desired location on low back wrap.
Place wrap on lower back area with electrode conductive pads
flush against skin.
Adjust wrap to fit snugly around low back.
1
2
3
4
5
6
7
8
Connect lead wires
to the electrodes
.
Center and apply
electrodes to
the inside of the
conductive wrap.
Fix wrap
around waist.
Fasten the Velcro®
wrap.
