– 8 –
Congratulations!
on your purchase of this sophisticated EMPHASER ECP26NEO-XT3 2-way component system.
If you plan on installing this component system by yourself, please read the following instructions
carefully, before attempting the installation. For any further information please contact your EM-
PHASER dealer.
TECHNICAL DESIGN FEATURES
MID/WOOFER ECP26NEO-XT3
■
16.5 CM EURO-DIN ALUMINUM DIE-CAST BASKET
■
2 OZ. NdFeB N35H NEODYMIUM CENTER MAGNET
■
WOVEN BLACK KEVLAR™ CONE
■
CAMBRIDGE MBR BUTYL RUBBER SURROUND
■
PROGRESSIVE BLACK NOMEX™ SPIDER
■
2-LAYER COPPER CLAD ALUMINUM WIRE VOICE COIL
■
36 MM Ø BLACK KAPTON™ VOICE COIL FORMER
■
VENTED CAVITY BELOW SPIDER
■
SCREW TERMINAL BINDING POSTS
■
INSULATED TINSEL LEAD WIRES
TWEETER ECP-XT3
■
25 MM INVERTED DOME DLC TITANIUM TWEETER
■
TITANIUM DOME WITH DIAMOND LIKE CARBON COATING
■
ALUMINUM FORMER – CCAW WIRE VOICE COIL
■
NdFeB N40 NEODYMIUM MAGNET
■
TWEETER HOUSING PARTS MADE OF DIE-CAST ALUMINUM
■
FLAT- AND FLUSH MOUNTING ADAPTORS INCLUDED
■
LOW VISCOSITY FERROFLUID
CROSSOVER ECP26NEO-XT3
■
TWEETER ATTENUATION BY 4-POSITION JUMPER
■
GLASFIBER CIRCUIT BOARD WITH 70 UM TRACES
■
MKP POLYPROPYLENE METAL-FILM CAPACITOR
■
LOW TOLERANCE METAL-OXIDE RESISTORS
■
LOW RESISTANCE AIR CORE INDUCTORS
■
OSRAM HPCCR LAMP TWEETER PROTECTION
ECP26NEO-XT3 Manual 14.07.2003 12:34 Uhr Seite 8
