EMPHASER EA1350D, Installation & Operating Manual

Page: 27 / 32

6. teCHnIsCHe speZIFIKatIonen ea1350d
Class-d Mono VerstÄrKer
520W x 1 @ 4 Ohm (< 1.0% THD / 14.4V)
850W x 1 @ 2 Ohm (< 1.0% THD / 14.4V)
1200W x 1 @ 1 Ohm (< 1.0% THD / 14.4V)
1 Ohm stabil
Full-MOS-FET Class-D Verst�rker
Master / Slave Betrieb möglich
Variables Subsonicfilter, 10 – 60Hz mit 12dB/Okt.
Variables Tiefpassfilter, 30 – 300Hz mit 24dB/Okt.
Variabler Phase-Shift von 0 – 180°
Variable Eingangsempfindlichkeit von 0.3 – 7V
D�mpfungsfaktor an 4 Ohm: > 350
Signal-Rauschabstand: > 85dB
Externe Basspegel-Fernbedienung
25mm² Strom-Anschluss Terminals
Dimensionen BxHxT: 350 x 62 x 250mm
6. teCHnICal speCIFICatIons ea1350d
Class-d Mono aMplIFIer
520W x 1 @ 4 ohms (< 1.0% THD / 14.4V)
850W x 1 @ 2 ohms (< 1.0% THD / 14.4V)
1200W x 1 @ 1 ohms (< 1.0% THD / 14.4V)
1 ohms stable
Full MOS-FET class-D amplification circuitry
Master / slave operation
Variable subsonic highpass filter, 10 – 60Hz with 12dB/oct.
Variable lowpass filter, 30 – 300Hz with 24dB/oct.
Fully variable phase-shift 0 – 180°
Variable input sensitivity: 0.3 – 7V
Damping factor @ 4 ohms: > 350
Signal to noise ratio: > 85dB
Remote low pass level remote control
25mm² direct power input terminals
Dimensions WxHxD: 350 x 62 x 250mm
EA1350-1800D Manual (EDF).indd 27 28.02.2006 12:03:53 Uhr