DVD-028 & DVD-029
u
EMPEROR RECORDER 2 with HDD
43
Connection for SCART TV
The DVD Video recorder support CANAL+ programmer
connection.
Connection for TV Tuner
Refer to the manual of the connected TV.
Turn off the power and unplug both units before set-
ting up any connection.
RF out is signal pass-thru ONLY. Use A/V, S-Video,
or Component outputs for playback, for TV witho-
ut A/V inputs, therefore Modulator will be required
which you could get from the market.
Connection For AV Signal (A/V REAR INPUT)
Connect your recorder with S-Video cable. If the Signal
Source has an S-Video output. Do not connect the yellow
Video cable if using the S-Video cable.
NOTE:
1. There is a SCART INPUT interface in the player
You could connect the SCART INPUT adapt with a
SCART output system. The DVD Video recorder co-
uld record the signal from SCART interface in CVBS
mode .The RGB mode record way is not supported
at present.
2. Refer to the manual of the connected system.
3. Turn off the power and unplug both units before set-
ting up any connections.
Connection For AV Signal (A/V FRONT INPUT)