9
GAS LAVASTONE GRILLS
Kasap T
ip Dik Buzdolapları
G
INJECTOR CHANGE AND GAS SETTING
GAS LAVASTONE GRILL BURNER - INJECTOR CHANGE CHART
Gas Group
Gas
9LG-7LG
Pilot
Injector
mm
Injector
mm
2
G20
2,15
0,41
G25
2,15
0,41
3
G30
30 mbar
1,35
0,22
50 mbar
1,6
0,20
G31
37 mbar
1,35
0,22
30 mbar
1,3
0,20
Change of Burner Injector;
1. Rip off the injector at the entrance of burner with suitable equipment
2. Change "A" injector by paying attention to the datas at chart with suitable injector.
( Image 1)
3. Set the burner air entrance "F" setting by loosening "B" bolt and moving venturi pipe
forward-back. (Image 2)
4. Change "C" injector by paying attention to the datas at chart with suitable injector.For
this it is enough to take off "D" fitting and pull the gas pipe to down. (Image 3)
Setting of Half Flame;
1. Remove the tap button and set by turning tap half flame screw "K" with suitable
screwdriver.(Image 4) Turn it to left for transformation from LPG to NG,turn it right for
transformation from NG to LPG.
2. After this process,operate the appliance and set it not to be deflated during transition
from full flame to half flame.
