EMPERO EMP.7FE010, User Manual

Page: 6 / 20

6
ELECTRIC FRYERS
ELEKTRİKLİ FRİTÖZLER
Kasap Tip Dik Buzdolapları
D OPERATION
*Control Panel;
A : Heat setting button
B : Indicator lamp
* Operating;
•
Before operating the fryer,place filter and filter into the tank.
•
Turn off the valve that is in fryer.
•
Open the fryer’s lid and add oil into the tank.Pay attention to minimum and maximum
lines while adding oil.
•
Plug in the appliance.
•
Set the thermostat switch to desired heat in order to operate the appliance.
•
Fryers are 2 typ
e; sıngle-tank, double-tank.There are 2 resistances and thermostats in
every tank.If thermostat switch is set to on position,the heaters start to work and indicator
lamp that is on thermostat signals.
•
When the oil temperature reaches indicator temperature,heaters are disabled through the
agency of limit thermostat.When the oil temperature is lower than indicator
temperature,the limit thermostat steps in and heaters start to work.
•
Put the materials that will be fried into the tank in the basket during oil heating.
•
After putting the materials into the tank close the lid and start to fry
•
Add oil when the oil is at minimum level.
•
After frying process,swtich the thermostat to (0) position and unplug the appliance.
•
Open the lid and take off the basket from tank
•
In order to remove the oil from fryer,first leave the oil to be cooled.Then attach the oil
drainage pipe to the oil drainage hole.
•
Slide the slidiing sled to the right to remove the oil.