05
06
Important Information
l
Make sure to use your test strip immediately after retrieving it from the vial,
be sure to keep the test strip vial closed tightly at all times.
l
For the most accurate results, make sure your hands are clean and dry
before removing the test strips from their vial.
l
Do not touch test strip slit.
l
Do not use test strips that have expired, using expired test strips may cause
inaccurate test results.
l
Never reuse a test strip that has had either blood or control solution
applied. The Medisign MM1100 Test Strip is for single use only.
l
This product is not recommended for pregnant women, newborns or if you
are severely dehydrated.
l
Before the test you must make sure that the code number displayed on
the meter matches the code number on the test strip vial.
l
Keep your Medisign MM1100 BT Blood Glucose Meter, lancing device,
lancets and control solutions out of reach of children or pets.
l
Be sure to check the glucose measurement unit on the meter before the
test.
- This meter is preset to mg/dL.
- mg/dL is the unit of measurement used in the US.
l
Make sure you close the test strip vial is closed tightly and store at indoor
area between 39 ~ 86
℉
,10~90%RH. Do not freeze.
l
Keep test strips away from direct sunlight and heat.
l
Use this system only for blood glucose test.
l
℉
Before using the Medisign MM1100 BT Blood Glucose Monitoring System,
please read this manual carefully.
l
The meter and test strips should be handled at the same temperature.
l
For accurate test results, keep the Medisign MM1100 BT Blood Glucose
Monitoring System operating temperature at a range between 50-104 for
more than twenty (20) minutes before testing.
