E41-B Bookshelf Speaker
5
Owner’s Manual
Specifications
System Type:
Frequency Response:
Sensitivity:
Recommended Power:
Drive Units:
Crossover Frequency:
Crossover Slope:
Impedance:
Cabinet Material:
Cabinet Finish:
Grille:
Dimensions:
Weight:
Warranty:
Bookshelf
70Hz-20kHz (±3dB)
86dB (2.83V @ 1 Meter)
30-100 Watts
(1) 4” (102mm) Beryllium Cone Woofer
(1) 1” (25mm) Silk Dome Tweeter
3,000 Hz
12dB/Octave
8 Ohms
Medium Density Fiberboard (MDF)
High-gloss Black Ash
Black Cloth
6-5/8” W x 11-5/8” H x 8-3/4” D
(168mm W x 295m H x 222mm D)
6 lbs. (2.72 kg)
5 Years
No sound from
speakers.
No sound from
one speaker.
Very little bass
and/or imaging.
Speaker wire not connected.
Speaker selector on amplifier is not on.
Balance control on receiver or pre-amp
is not centered.
Speaker wire not securely connected.
Speakers are wired out of phase.
Troubleshooting
Probable Cause:
Situation:
Solution:
Make sure wire is connected at both
the speaker and the amplifier observ-
ing proper polarity.
Activate proper selector on amplifier.
Place balance control in the center.
Check all connections at amplifier
and speakers.
Check entire system for proper polar-
ity and make adjustments
as necessary.
Model
E41-B
