background image

Features 

(continued)

Variable crossover, adjustable phase control and auto on/off are also used for convenience 

and easy integration with other speakers. Audio can be supplied to the subwoofer by either 

interconnect (LFE/line level inputs).
Cabinets are constructed from medium density fiberboard because of its inert 

properties. The thickness of the front baffle also prevents excess acoustic radiation. 

Sophisticated computer modeling and measurement techniques are used extensively 

in the powered subwoofer design process.

Room Setup Suggestions

In order to obtain the best possible sound from your subwoofer and speaker system, it 

is important to determine where the subwoofer and speakers will sound best in your 

listening room. Room reflections from the floor, ceiling and side walls influence the 

balance, imaging and overall sonic quality at the listening position. Experiment with 

placement to determine which location offers the best overall sound. As a general 

guide, use the room layout diagram and the following descriptions when setting up 

a home theater system. The subwoofer and speakers shown in the diagram may not 

always be applicable to your system.

Front Main Speakers 

As a starting point, place your left and right tower speakers at least 15 inches from 

the wall and 7-feet apart from each other. The distance from the listening position 

to each speaker should be close to the distance that separates the two main speakers. 

Angling the speakers inward towards the listening position may give a more spacious 

and realistic sound stage. 

Center Channel Speaker

The center channel speaker should be placed in the center between both left and right 

main speakers. Often this positioning dictates placing the speaker either directly 

above or below a television monitor. The center channel speaker may be placed in a 

horizontal (lying down) or vertical (standing) position.

Rear Surround Speakers

The 2-way bookshelf speakers may be placed either above, behind or to the sides 

of the listening position. The listening position should be centered between the 

surround speakers. For best performance you may want to experiment with angling 

the surround speakers either towards or away from the listening position.

Subwoofer

In order to obtain the best possible sound from your subwoofer, it is important 

to determine where the subwoofer will sound best in your listening room. Sound 

reflections from the floor, ceiling and side walls influence the balance, imaging and 

overall sonic quality at the listening position. Experiment with subwoofer placement 

to determine which location offers the best overall sound. 

3

Summary of Contents for E10s













Reviews: