Emotiva XPR-2, User Manual

Page: 10 / 28

Page 7
XPR-2
XPR-2 Front Panel
CH1 CH2
STANDBY PEAK DIM METER
1 2
3 4 6 5
1. Accent Lighting
Blue accent lighting is provided by cool, long lived LEDs.
2. Channel Status and Meter LEDs
Each channel has a single Channel Status LED (the bottom one), and a blue LED Bargraph
Meter above it. Either or both are active depending on the configuration chosen. If a fault
occurs on one or both channels of the XPR-2, the LED above the Standby button, the
Channel Status LEDs, and the LED Bargraph Meter LEDs associated with the channel that
is reporting the fault will flash red.
3. Standby Button (and Power LED)
Press to switch the amplifier On; press again to return to Standby. The LED above the
button will illuminate red for Standby, blue for On, and blinking red for a Fault condition.
4. Peak Button
Press once to switch the LED Bargraph Meters into Peak Meter mode; press again to select
Peak Hold Mode.