Emotiva XPA HC-1, User Manual

Page: 3 / 28

Important Safety Precautions and Explanation of
Symbols
!
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the XPA HC-1
High Current Monoblock Power Amplifier. After successful installation and configuration of the XPA HC-1
amplifier, be sure to retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow all
instructions and heed all warnings on the XPA HC-1 amplifier and in this manual. The vast majority of the
subsequent safety precautions are common sense. If you are not comfortable with the installation of audio/
video entertainment equipment, you should seek the services of a qualified installation professional or call
us for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE XPA HC-1 AMPLIFIER
NEAR WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN OR MOISTURE, DO NOT EXPOSE IT
TO DRIPPING OR SPLASHING FROM OTHER SOURCES, AND ENSURE THAT NO OBJECTS FILLED WITH
LIQUIDS (SUCH AS VASES) ARE PLACED ON IT. DOING SO MAY RESULT IN DAMAGE TO THE UNIT AND
THE RISK OF ELECTRIC SHOCK, WHICH MAY RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER FROM THE
XPA HC-1 AMPLIFIER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE UNIT. REFER ALL SERVICE
TO QUALIFIED SERVICE PERSONNEL.
Do not install the XPA HC-1 amplifier near or above any heat sources such as radiators, heating vents, or
other apparatus’ that produce heat. Do not block any ventilation openings or heat sinks. Avoid installing
the unit directly above other heat-producing equipment unless sufficient ventilation or forced-air cooling is
provided.
Do not install the XPA HC-1 amplifier in locations without proper ventilation. The XPA HC-1 should not be
operated on a bed, sofa, rug, or similar surface that may block vents. The unit should not be installed in
an enclosed location such as a bookcase, cabinet, or closed equipment rack unless sufficient forced-air
ventilation is provided.
Always install your XPA HC-1 amplifier according to the manufacturer’s instructions and only use
attachments or accessories specified by the manufacturer.
Do not install the XPA HC-1 amplifier on any stand, shelf, or other piece of furniture that is unable to
support its weight. If a cart is used to move the unit, use caution to avoid injury from tip-over.
Connect the XPA HC-1amplifier only to power sources of the correct voltage (as shown in this manual and
on the XPA HC-1 unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful
where the power cable enters the power outlet and the unit.
Only connect the XPA HC-1 amplifier to an electrical outlet or extension cord of appropriate type and rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using
unsafe adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a
third ground prong in addition to the two main conductors. The wide blade or third groundling prong is
provided for your safety. If the provided plug does not fit your outlet, consult an electrician to replace your
obsolete outlet. If you replace the power cord, only use one of similar type and equal or greater current
rating.
!