The power cable for the XPA Gen3 amplifier should be unplugged from the outlet during severe electrical storms,
or when unused for a long period of time.
Only replace the fuse(s) in the XPA Gen3 amplifier with fuse(s) of proper value and voltage rating.
The XPA Gen3 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the unit and
NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside of the
unit.
You should seek service for your XPA Gen3 amplifier by qualified service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE XPA Gen3 AMPLIFIER FROM THE AC POWER MAINS, DISCONNECT
THE AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE XPA Gen3 AMPLIFIER MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
WARNING: EVEN THOUGH THE XPA Gen3 AMPLIFIER UNIT IS MODULAR, MODULES SHOULD ONLY BE ADDED,
REPLACED, OR RECONFIGURED BY AUTHORIZED SERVICE PERSONNEL. USERS SHOULD NOT ATTEMPT TO ADD,
REMOVE, OR RECONFIGURE MODULES INSIDE THE XPA Gen3 AMPLIFIER UNLESS EXPRESSLY AUTHORIZED
AND INSTRUCTED TO DO SO BY EMOTIVA OR ONE OF OUR AUTHORIZED REPRESENTATIVES. IMPROPER
INSTALLATION OR CONFIGURATION OF MODULES INSIDE THE UNIT MAY RESULT IN EQUIPMENT DAMAGE OR
PERSONAL INJURY.
!
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
!
