Emotiva XPA-100, User Manual, Page: 12 / 25

Page 8
XPA-100
4. Status LED Switch
Disables the front panel status LEDs when set to Off.
5. Unbalanced (RCA) Input
Solid machined gold-plated RCA jack accept a line level unbalanced input.
6. Un-Balanced / Balanced Selector Switch
Switches between the Unbalanced (RCA) and Balanced (XLR) inputs. Up selects the
Unbalanced input and Down selects the Balanced input. Only one input can be used at
once for each channel. (It is allowed to plug in both a balanced and an unbalanced source
and use the switch to select between them, but only one will be active at once.)
7. Balanced (XLR) Input
Standard XLR connector accepts a line level balanced input.
8. Speaker Terminals
Full-sized five-way binding posts accept banana plugs, lugs, or bare wire. Two pairs of
binding posts are provided to facilitate bi-wiring.
Note: Both pairs of speaker terminals carry the same signal. Two pairs of terminals
are provided to facilitate bi-wiring.
9. AC Power Switch
Switches the mains AC power to the XPA-100 On and Off. When this switch is Off, no
controls operate (the XPA-100 cannot be turned On from the front panel or by a trigger
signal).
10. Input Voltage Indicator
The XPA-100 automatically detects and switches between 115 VAC and 230 VAC. These
indicators tell you which line voltage the XPA-100 has detected.
11. IEC Power Cord Receptacle
Accepts a standard removable IEC AC power cable (a high-quality commercial power cable
is included).