Emotiva XDA-2, User Manual

Page: 19 / 30

Page 15
XDA-2
Connecting the Trigger Input and Trigger Output
The XDA-2 cannot be switched on by the trigger when the rear panel AC Power switch is
Off. The Trigger Input accepts a 12 VDC (nominal) trigger signal from another device via a
standard 1/8” mono plug. When the trigger is asserted, the XDA-2 will switch On; when the
trigger is removed, the XDA-2 will return to Standby mode. The Trigger Output sends out
12 VDC whenever the main power to the XDA-2 is On (and NOT when it is in Standby
mode) which can be used to switch on other units with trigger capabilities.