background image

 

 

SAFETY PRECAUTIONS

 

Read this User's Guide thoroughly before attempting to install and configure the XDA-1 DAC. All the safety and 
operation instructions should be read before any operation of the component(s) begin. After successful 
installation and configuration of the XDA-1 DAC, be sure to retain this manual in a safe place for any future 
reference needs. 

All warnings on the XDA-1 DAC preamplifier and in these operating instructions should be followed. Safety is a 
key component to a long lasting and trouble free installation. The vast majority of the subsequent safety 
precautions involve simple common sense. If you are not comfortable with the installation of audio/video 
entertainment equipment, it will be to your benefit to seek the services of a qualified installation professional. 

The Emotiva XDA-1 DAC preamplifier  should NEVER be used near water such as a bathtub, washbowl, 
kitchen sink, laundry tub, in a wet basement or near a swimming pool etc. 

 

The Emotiva XDA-1 DAC preamplifier should be situated so that its location or installation position does not 
interfere with proper ventilation.  

The Emotiva XDA-1 DAC preamplifier should not be situated on a bed, sofa, rug or similar surface that may 
block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed 
equipment rack that may impeded the flow of air through ventilation openings. If installed in a closed 
equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air 
circulation.  

The Emotiva XDA-1 DAC preamplifier should be situated away from heat sources such as radiators, or any 
other devices which produce heat. 

The Emotiva XDA-1 DAC preamplifier  should be connected to a power supply only of the type described in 
this User's Guide and what is labeled on the Emotiva XDA-1 DAC Preamplifier component. Power supply 
cords should be routed to that they are not in high foot traffic areas or pinched by item placed upon or against 
them, paying particular attention to cords at the wall plugs, convenience receptacles, and the point where they 
connect into the Emotiva XDA-1 DAC. The power cord for the Emotiva XDA-1 DAC preamplifier should be 
unplugged from the outlet when unused for a long period of time.  

When it's time for cleaning the Emotiva XDA-1 DAC preamplifier, it should be cleaned only as recommended in 
this User's Guide. Never spray liquids directly into the component's vent openings. Care should be taken so 
that small objects do not fall into the inside of the Emotiva XDA-1 DAC preamplifier. 

The following situations require that your Emotiva XDA-1 DAC Preamplifier be serviced only by qualified 
service personnel: 

1.  The power-supply cord or the plug has been damaged; or 
2.  Objects have fallen, or liquid has spilled into the component; or 
3.  The XDA-1 DAC preamplifier has been exposed to rain; or 
4.  The XDA-1 DAC preamplifier does not appear to operate normally or exhibits a marked change in 

performance; or 

5.  The XDA-1 DAC preamplifier has been dropped, or its enclosure or chassis is damaged. 

 

The user should not attempt to service the XDA-1 DAC preamplifier beyond the means described in this User's 
Guide. All other servicing should be referred to Emotiva. 

 

 

Summary of Contents for XDA-1























Reviews: