Page 8
BasX PT-100 Stereo Preamp / DAC / Tuner
BasX T-100 Front Panel
1. Headphone Jack
Use this jack to connect a pair of high-quality headphones.
Note: The Main Outputs are muted when headphones are inserted.
Note: The intelligent level control on the PT-100 independently stores and remembers the
levels for your Main Outputs and your Headphones. When you unplug your headphones, your
speakers will return to their previous level.
2. Input Buttons
In normal operation, these buttons are used to select which Input to listen to. (They perform
different functions when you’re in the Setup Menu; see the Setup Menu section for details.)
3. Front Panel VFD Display
The large, bright, easy to read VFD display keeps you continually informed about the status of
your PT-100. The brightness of the front panel display can be configured in the Setup Menu.
4. Power / Standby Button
This button is used to toggle the PT-100 between Standby and On modes. The halo ring around
the button will be illuminated amber when the PT-100 is in Standby mode, and blue when the
PT-100 is On.
Note: The PT-100 will only operate when the AC Power Switch on the rear panel is On. When
the AC Power Switch is turned On, the halo will illuminate amber; at which point pressing the
Standby button will turn the PT-100 On.
5. Volume Knob
In normal operation, this knob is used to control the Volume on the PT-100. (It performs slightly
different functions when you’re in the Setup Menu; see the Setup Menu section for details.)
4
5
1
3
2
INPUTS
PT-100
Summary of Contents for BASX PT-100
Page 1: ......
Page 2: ......
Page 6: ...Page 2 BasX PT 100 Stereo Preamp DAC Tuner...
Page 32: ......
