background image

Page 15

AIRMOTIV RS13 R

efeRence

 S

ubwOOfeR

 Care and Maintenance

 Periodic Maintenance

Your Airmotiv RS13 Reference Subwoofer requires no periodic maintenance or calibration.

 Cleaning the Cabinet and Baffle

• 

The cabinet of your Reference Subwoofer should normally be cleaned with a rag dampened 

with plain water. 

DO NOT

 spray water directly onto or into the speaker and 

DO NOT

 use 

abrasive or chemical cleaners. Gently dry the surface with a clean soft rag after cleaning.

• 

If necessary, use a mild detergent, wipe the surface with a rag dampened with plain water 

afterwards to rinse it, and then gently dry the surface with a clean soft rag.

• 

If something nasty does get on the sides or top of your Reference Subwoofer, use a rag 

dampened with a weak solution of dish detergent or other mild cleaning liquid, followed by a 

rag dampened with plain water, and then dry with a clean rag. 

 Cleaning the Grill Cloth

• 

If necessary, the grill cloth may be carefully vacuumed to remove dust or hair. 

• 

Animal hair may be removed by using a “tape” type lint remover or soft brush. Avoid using 

brushes with stiff bristles that may pull or damage the grill cloth.

Note: DO NOT use any sort of liquid or wet cloth on the woofer cone, grill, or control panel.

 Replacing The Main AC Line Fuse

The main AC power fuse on the Airmotiv RS13 Reference Subwoofer is accessed from the rear 

panel. In the unlikely even that you need to replace the fuse, here’s how:

• 

Turn off your RS13.

• 

Disconnect the IEC power cable from its receptacle on the rear panel. 

• 

The fuse is located in a small drawer which is part of the IEC power cable receptacle. 

(Refer to the picture on Page 9.)

• 

Once the cable is removed, reach across the cable receptacle opening with a small knife or 

screwdriver, and pry gently outwards on the small plate with the fuse symbol on it. The fuse 

holder will slide out like a drawer, allowing you to access and replace the fuse.

• 

Replace the fuse with a new one of the same size and rating.

• 

Carefully replace the fuse holder, making sure to orient it in the correct direction, and snap it 

firmly back into place.

• 

Replace the IEC power cable.

Note: If the fuse in your Reference Subwoofer blows repeatedly without apparent reason, then 

you might have an electrical fault in your sub, and you should call Emotiva Technical Support 

for assistance.

Summary of Contents for Airmotiv RS13

























Reviews: